Перейти к основному содержанию

Дата выхода 19 сентября 2014 года. Это маленькая версия iPhone 6 Plus с 4.7-дюймовым экраном.

4994вопросов Показать все

one of the screw hold breaks and I can't turn on the phone

My iphone 6 has a long time problem with the display, some time it turns on when I pressed the power/home button but some time it doesn’t, while the sound and touch id all still works normally, so I suspected that it’s just a loosen cable problem.

So I opened the phone and unplug and replug the cables, but then I broke one of the screw holes when I try to put back everything, and now I can’t turn on my phone. Some searching shows that the screw hole that I broke was responsible for the power supply. How do I fix this?

Block Image

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

2 Ответов

Выбранное решение

If you had a good microscope and excellent microsoldering skills you could rebuild traces that got damaged..it’s not a DIY job, either you’re a pro or you’ll have to find someone do it for you.

Был ли этот ответ полезен?

Оценка 1

2 Комментариев:

I don't have the tools and skills. How much does it cost to fix this in stores?

из

@hoyun Cost of repair may vary with the place you are living..easiest thing is to find someone reputable in your area, but some repair shops offer mail in service too. Good news is many shops offer a no fix no fee service..your issue is quite straightforward repair, thus it won't be too difficult to get a quote.

из

Добавить комментарий

This is known as long screw damage. The traces underneath the logic board have been torn off by the screw, and now the phone is missing vital traces. This can be fixed by a microsolderer, but is a more of an expensive fix.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

hoyun будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 52