Перейти к основному содержанию

Repair and disassembly guides for the Nerf Elite Triad EX-3 released in 2013.

1вопросов Показать все

Dart not going all the way in

The darts will not sit all the way in the chamber. They will slide out about a 1/2 in, this not fire correctly

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

2 Ответов

Наиболее полезный ответ

nerf guns are picky about their ammo sometimes, that gun in particular is really picky, darts from HB or Walmart nock-offs have slightly different inner diameter then Nerfs….. also kids chewing on them doesnt help in my experience. . my kids will eat anything..

Был ли этот ответ полезен?

Оценка 1

1 Комментарий:

I have the same problem. It is just one chamber, all the time. Doesn’t matter which darts (I’m only using the 3 Elite darts that came with the gun.... since it’s my child first one). The other two chambers always work and the third chamber always pops the darts out an inch. I’ll probably try to dissemble and see if I can figure out what’s going on

из

Добавить комментарий

So as its not going in fully i taped some paper to the dart shown in the below picture and it worked cause it was loose

Block Image

Block Image

Block Image

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

Raymond Hylton будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 2

За последние 30 дней: 14

За всё время: 659