Опции

iPhone 6 Short - KEEP Restarting

Hi Everyone, Hi @refectio Sir.

I have an iphone 6 ( its our personal phone , not water damage)

The phone simply drop down, and keep restarting.

Sometime, we can use it for some hours and then begin restarting.

I connect it to DCPS , phone absorb 0,08 amp (after ONLY battery connected)

The strange thing is, if i connect battery (i already try with new battery) the phone turn on automatically, without press power button.

If the battery is dead, the cable and battery logo appear continuously on the screen.

It seems, like someone press power button continuously.

i check all cap diode and filter connect with power button FPC but everythng is well.

Tristar , Tigris voltage is ok, phone charge normally.

I really dont understand how can i remove this short.

Thanks

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

Опубликовано: 31 янв 2019 г.

Опции

Remove the board and connect only a known good Lightning Port and Battery. Then connect it o a charge or an iTunes enabled computer and see if it boots properly and stays booted over time. If it does, then connect a screen and do the same test.

The issue may be with the power button flex (or power button) which was damaged by the drop.

Был ли этот ответ полезен?

Да Нет

Оценка 2

1 Комментарий:

Thank u @minho SIR.. i already tried only board connect with dcps, but when i connect battery cable, phone turn on immediatly..

Evertything is perfect, the only problem its restart often automaticaly and absorb 0,08 amp (with battery cable connect, withput power on)

Thanks

31 янв 2019 г. из AGS

Добавить комментарий

iPhone 6

iPhone 6 Short - KEEP Restarting

1 ответ

Добавьте свой ответ