Перейти к основному содержанию

Fix Your Stuff

Right to Repair

Parts & Tools

Repair and support for the controllers that shipped with the PS3. Released mid 2008, the six-axis lithium battery powered controller (CECHZC2) is straightforward to repair.

133вопросов Показать все

Can't get the vibrators out

So my remote had the entire left handle sheared off,

Block Image

but it still works so im gonna try to fix the damage, but i cant seem to get the vibrators out as the guides appear to have different models (if that's even a thing idk) and so im kinda stick. Appeceriate help.if possible

Block Image

Отвечено! View the answer У меня та же проблема

Это хороший вопрос?

по рейтингу 1
Добавить комментарий

1 ответ

Выбранное решение

First thing I usually check when I am experiencing difficulties with any repair is how the part looks to be secured. Check if it looks like there is adhesive or if there is small screws. Obviously both would prevent you from removing the vibrators. I will assume there are no screws because it should be obvious is there is. Again assuming it is adhesive the easiest way to soften/weaken the adhesive is using isopropyl alcohol. This should break down the glue enough to allow you to carefully pry the vibrators out. You can use a spudger if you have one, if not a small flat head screwdriver and make sure not to pry on any points that could break off (like in between the body and rotating weight) but rather somewhere like the main body (the larger, metal section) of the vibrator. Hope that helps!

Был ли этот ответ полезен?

по рейтингу 0
Добавить комментарий

Добавьте свой ответ

TaloNNn будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 7

За всё время: 34