Перейти к основному содержанию

Repair guides and support for all-in-one washer and dryer assemblies as well as stacked units.

139вопросов Показать все

Fridgadire won’t agatate

Ii fills with water then stops and get a biting smell but motor sounds like it running belt looks intake I can turn it to spin cycle and it spins and drains water just won’t work in wash cycle after water stops

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

Выбранное решение

Cause 1

Agitator Repair Kit

If the washer won't agitate, replacing the agitator repair kit may solve the problem. The kit contains the agitator components that are most likely to wear out and/or fail. If any of the parts are worn out, stripped, or damaged, replace the kit.

Cause 2

Drive Block or Bell

The drive block connects the washer transmission to the agitator. If the drive block is worn out, the transmission shaft will still move back and forth, but the agitator will only move slightly or will not move at all. Inspect the drive block for damage. If the drive block is worn out, stripped, or damaged, replace it.

Cause 3

Motor Coupling

The motor coupling connects the motor to the washer transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission. The motor coupling can also fail due to normal wear. Inspect the motor coupling to determine if it is broken. If the motor coupling is broken, replace it.

Был ли этот ответ полезен?

Оценка 2
Добавить комментарий

Добавьте свой ответ

daniel.winchell будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 1

За всё время: 53