РАЗРЕШЕННЫЙ: Detects internal speaker in System Preferences but no sound - Mac Pro Late 2013

Detects internal speaker in System Preferences but no sound

No boot sound and no sound when in OS (10.14.3). System Preferences shows that the internal speaker is there. I can plug in headphones and the output source changes to headphones and sound does play through them. I've replaced the speaker, I/O Board, and cable that connects I/O Board to logic board. I've tried resetting SMC and PRAM. I've booted to a live Linux USB and sound doesn't work there either. I've run out of ideas besides replacing Logic board and/or CPU riser board. Thanks for the help.

2 Комментариев

What does the Sound control panel show as far as Output?

16 апр 2019 г. из Dan

Internal Speakers

16 апр 2019 г. из undrgrndneo

Опубликовано: 16 апр 2019 г.

Опции

Did you replace the Port board? It has the DAC chip (Cirrus) on the same side as the speaker. I’m suspecting the one of the trace lines going to it from the speaker is your problem. Check the solder joints on the chip and the surrounding area. Trace the speaker connection to the DAC

Был ли этот ответ полезен?

Да Нет

Оценка 2

2 Комментариев:

By port board do you mean the board the speaker plugs into? If so then yes it's been replaced. I could look at the DAC chip I suppose but I don't have a reflow station if that is the issue.

16 апр 2019 г. из undrgrndneo

Yes, the speaker ties to the DAC so either the connection at the speaker or the solder joints on the DAC and the SMD around it had an issue.

Also you might want to double check the speaker I think its a 4 Ohm unit.

16 апр 2019 г. из Dan

Добавить комментарий

Mac Pro 2013

Detects internal speaker in System Preferences but no sound

1 ответ

Добавьте свой ответ