Перейти к основному содержанию

The Durango was marketed as a sturdy truck-based SUV designed to hold up to seven passengers and tow up to 7,500 lb (3,400 kg) when properly equipped.

19вопросов Показать все

How do I go about r and r ing a bad freeze plug?

My sons 1998 Dodge Durango had a cracked radiator. We have replaced the radiator and started refilling the system and there she blows, a steady stream of fluid coming from the front most freeze plug on the passenger side of the block. Is there an easy way to remove one of these? I remember wrestling with one years ago and I seem to remember it being a pain in the a__!

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

2 Ответов

Drill a pilot hold get a slide hammer thread in a course stud grab it with the sh chuck and give it a few wacks if that doesn't do it hit it on the lip and wack it in turning the plug sideways in the hole yank with vise

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

I use a screwdriver that I can hit with a hammer, and drive a hole in the middle, they pry it out.

https://www.youtube.com/watch?v=lqHVNqwK...

Make sure you use a little RTV when you re-install it.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

alan.thomas65 будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 1

За всё время: 57