РАЗРЕШЕННЫЙ: Kenmore washer will agitate and drain but won't do final spin cycle - Kenmore Elite HE3 Washing Machine

Kenmore washer will agitate and drain but won't do final spin cycle

My Kenmore front loading washer will agitate and drain but won't do final spin which leaves the clothes dripping wet. There is also a buzzing noise when it's trying to do the final spin but not anytime other than that. The belt looks in great shape, the machine still agitates, just won't do it normal fast spin at the end. Could this be the wax motor part of the door locking mechanism?

Опубликовано: 7 мая 2019 г.

Опции

Cause 1

Lid Switch Assembly

The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer will not spin. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity, replace it.

Cause 2

Motor Coupling

The motor coupling connects the motor to the washing machine transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission. The motor coupling can also fail due to normal wear. Inspect the motor coupling to determine if it is broken. If the motor coupling is broken, replace it.

Cause 3

Drive Belt

Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it.

Был ли этот ответ полезен?

Да Нет

Оценка 3

1 Комментарий:

where is the drive belt located?

22 сен 2021 г. из debbie mathieson

Добавить комментарий

Kenmore Elite HE3 Washing Machine

Kenmore washer will agitate and drain but won't do final spin cycle

1 ответ

Добавьте свой ответ