Перейти к основному содержанию

Repair and disassembly guides for Kenmore Microwaves.

157 Questions Показать все

Microwave shuts off intermittently, already replaced door switch assem

I have a model 401.80082700 serial 725MM00044. Intermittent problem. Microwave goes through heating cycle and then totally powers off…no display, no light, no power. After 15-30 seconds the display comes on and instructs to press clock and reset time of day. After doing so the microwave is fully functional and may operate several times before powering off again. Occasionally the display appears fainter than normal, esp the center of display. I have replaced the door switch assembly but after several days the intermittent problem has returned. What do you think? TY

Отвечено! View the answer У меня та же проблема

Это хороший вопрос?

по рейтингу 1

Комментарии:

After much delay and frustration I ordered and replaced the control board…..works great…..thanks for your recommendation!

от

Добавить комментарий

Skip the upgrade.

Take $10 off $50 with
SKIPANDSAVE10

Save Now

Skip the upgrade.

Take $10 off $50 with
SKIPANDSAVE10

Save Now

2 Ответов

Выбранное решение

Sounds like the problem is the control board, not the door assembly. Try replacing the main controller circuit.

Good luck!

Был ли этот ответ полезен?

по рейтингу 1
Добавить комментарий
Наиболее полезный ответ

There are two parts to that door switch, here they are on your model along with how to test them:

https://www.repairclinic.com/RepairHelp/...

Был ли этот ответ полезен?

по рейтингу 2
Добавить комментарий

Добавьте свой ответ

Ken Thome будет вечно благодарен.
Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 1

За всё время: 39