Перейти к основному содержанию

Repair information and guides for the 2015 Retina MacBook Air. Model A1534

281вопросов Показать все

replace plastic strip with MacBook logo?

The black plastic strip at the bottom of the Retina display is damaged, just by the left hinge. I need a new strip. How do I remove the old one, and where can I get a new one? Display works fine.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

Выбранное решение

You will need to warm up gently the glass being careful not to damage the screen, provide some protection. As it fits very tight in its slot a very thin metal spatula such as those used for painting that are relatively easy to get and quite cheap will help. You’ll need to lift up the strip rather than sliding anything under it as you have screen flexes running under that and the risk of damaging screen for good is quite high. An acrylic replacement can be found on eBay and probably Aliexpress.

Был ли этот ответ полезен?

Оценка 2

3 Комментариев:

@danj I didn't even think about the clutch cover and headed straight for the logo bezel cover..you're probably right, quite useless answer.

This is the one I thought was needed: https://www.ebay.it/itm/LCD-Display-Blen...

из

It could need both!

из

Добавить комментарий

Добавьте свой ответ

Robin Ray будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 1,704