Перейти к основному содержанию

Dryer does not display correct time for selector switch setting

We had a brief electrical outage when our dryer was working - I was actually in front of the dryer taking clothes out (on timed dry cycle ) and the dryer beeped, all the lights lit up and it powered off, then on. No dryer error codes were displayed. When it powered on, I noticed that the time on the display no longer corresponds to the setting on the selector switch. For instance, the timed dry setting used to be 12 minutes but now shows 3 dashes on the display. Other cycles are similarly affected. The small load setting also shows 3 dashes as does the towels setting. Any ideas?

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

Наиболее полезный ответ

Try resetting it by unplugging it from the wall for ten minutes.

UPDATE

Your control board may be fried. Please give us your model number so we can locate the part needed.

Был ли этот ответ полезен?

Оценка 3

1 Комментарий:

Thanks for the tip. I unplugged it for an hour, powered it up, no luck. Also tried running a load and tripping the breaker - dryer correctly showed a Power Fail code but still does not function correctly. Time for a service call.

из

Добавить комментарий

Добавьте свой ответ

Kirby Kroon будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 2

За последние 30 дней: 4

За всё время: 48