Репутация: 73
2
2
After almost one and half year my headphones just broke when I wanted to put them on. I was very surprised that this happened and I'm also very sad because I can't even wear them anymore. The sound and everything is just fine.
Это хороший вопрос?
Репутация: 781,4к
1,1к
892
2,3к
Floortje B the only way you can fix that is by either having someone 3D print you a new part for it or you’ll find another pair that is broken other than the hinge part. Looks like the 2 screws are the only thing that hold those to your headphone. Removing those most likely enables you to replace the broken part.
Был ли этот ответ полезен?
Репутация: 13
1
I figured out a temporary fix. I am posting this for others arriving here from search engines and the like. I assume OP's problem has long been solved. My fix is based on somebody else's fix.
I have 3D printed parts on the way, but my 'design' may actually press down on my ears better than the original. 🤔
What you'll need:
-Tie rip 2 mm
-Tie rip 4 mm
-Drill + 1,5 mm drillbit for metal
-Strong thin elastic.
-Pliers (for making sure the tierips are real tight.)
Alt for picture: https://imgur.com/a/TcRGRT2
Был ли этот ответ полезен?
Great quick fix! If you find the time, create a step by step guide for this!
@amber No time, this is what I got. It's pretty detailed already.
My device is broken exactly at the same point today. I fix it by drill a hole from one site to the other (1,2mm thick) and insert a steel pin (as it is used in watches). I used black tape to prevent fall out of the pin.
If anybody is 3D-printing original part, I would like to order one!
Был ли этот ответ полезен?
За последние 24часов: 0
За последние 7 дней: 6
За последние 30 дней: 25
За всё время: 1,562
4 Комментариев
Did you find a solution? I'm having the same problem and I'm looking for the replacement part to print it with the 3D print... But I can't find it...
из maurimarc
I duct taped it together until I got back home. (I was on an international internship). Then my dad gave me money to buy a new one.
из Floortje B
@Floortje B hahaha Ok thanks
из maurimarc
ok so I need the part that's still connected to the earmuff... the plastic piece with the 2 screws on the bottom of the first picture
из Legolas