Перейти к основному содержанию

Model A1990 / EMC 3359. Released in May 2019 with new 6-core and 8-core processor options.

86вопросов Показать все

MBP stopped detecting external display, DisplayPort over Thunderbolt 3

External monitor is a Dell U2718Q. Message on the monitor says “No DP signal from device”.

This worked pretty seamlessly for awhile, but it stopped working entirely. I’ve tried powering off both monitor and laptop, updated to latest MacOS, tried different USB-C ports on the laptop, different DP ports on the monitor, reset SMC, PRAM, NVRAM. Still doesn’t work. Any suggestions?

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 0
1 Комментарий

Do other USB-C/TB3 devices work on your system?

Did you try another display to see if the issue is with the display Vs the system.

из

Добавить комментарий

1 ответ

Выбранное решение

I haven't tried other devices. I did find a workaround though: I have a TB3 - USB/USB-C/HDMI dongle. So plugging the monitor DisplayPort into the dongle via the DP/USB-C cable that I was using didn't work. However, I then plugged monitor HDMI into the dongle, and it's working seamlessly again. I think this suggests that the DP/USB-C cable maybe went bad.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

kphill будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 2

За последние 30 дней: 5

За всё время: 1,160