Перейти к основному содержанию

Дата выхода 19 сентября 2014 года. Это маленькая версия iPhone 6 Plus с 4.7-дюймовым экраном.

4994вопросов Показать все

J2019 Diode Mode Values OK but Black Screen

HI

Iphone 6 PCB 820-3846A

J2019 Connector on PP5V7 LCD AVDDN CONN was 0L.

Changed U1501 and U1503 ow Diode value Reading is OK but still screen Black

Changed FPC Too just in case , same thing

Can any one help me in this case ?

Thanks in Advance

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

Выбранное решение

Do you mean PN5V7_SAGE_AVDDN or PP5V7_LCM_AVDDH; the rail you mention does not exist. It’s quite common for the PN5V7_SAGE_AVDDN to read OL so if that’s the case, I wouldn’t worry about it.

Did you check all of the connector pins or just some of them? When dealing with a dark/black screen, you need to insure everything reads okay and when possible, measure the actual voltages as well. You can get the QIANLI iBridge Test Cable to help you troubleshoot these kinds of issues.

Был ли этот ответ полезен?

Оценка 3
Добавить комментарий

Добавьте свой ответ

Formingus будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 1

За всё время: 125