What is this thing and how do I fix it?

Question

iPhone XS

iPhone XS был выпущен 21 сентября 2018 года в нескольких моделях: A1920, A2097, A2098, A2100. Они включают такие модификации: GSM или CDMA/eSIM/nano-SIM. Цветовое разнообразие ограничилось серебристым, золотым и Space Gray оттенками.

398вопросов Показать все

Joseph Prekins @jprek

Репутация: 25

2

Опубликовано: 23 мар 2020 г.

Опции

What is this thing and how do I fix it?

Hi,

This material between the front glass and stainless steel band on my iPhone XS has been damaged from a fall; a bit of it is kinda scraped off. I think JerryRigEverything called it a buffer or something in his durability video for the XS Max. I don’t know if it’s plastic, rubber or composite.

Attached image shows the material I’m talking about. It’s obviously not my phone; I don’t have a camera with me at the moment, sorry..

1) What is this material and what does it do? Is it rubber? Plastic? Composite?

2) How would I go about replacing it? Do I just get a new display? Does it come with a new display? iPhone XS Screen

Appreciate any help. Thanks :)

Продукт

iPhone XS Screen

$109.99

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 2

Добавить комментарий

2 Ответов

Tom Chai @tomchai Репутация: 73,8к 19 111 82 · Answer 1 · 2020-03-27T10:23:27-07:00

Наиболее полезный ответ

Tom Chai @tomchai

Репутация: 73,8к

19

111

82

Опубликовано: 27 мар 2020 г.

Опции

It’s called the bezel, It’s plastic cast around a metal frame, used to reinforce the screen and serves as structural attachment between the case and the screen. It is adhered to the glass with what looks like industrial strength adhesive and the adhesive loops the whole edge of the glass to make a water resistant seal.

Also it is the sealing interface between the screen assembly and the case. Removing the frame is extremely difficult and there seems no reliable way to reattach a new one to seal properly.

You may need to cut open the metal bezel, remove a few structural screw holes, then try to dissolve the adhesive and cut along the display, refer to below video.

https://www.youtube.com/watch?v=syC-HJLj...

Был ли этот ответ полезен?

Да Нет

Оценка 3

5 Комментариев:

It's not a bezel, it's a strip of rubber meant to protect from impacts.

27 мар 2020 г. из TheYootz Media Group

@yootzmedia no it’s plastic cast over metal frame, it does provide some bumper space between the screen and case, now ever the core structural element is the metal frame, which holds the glass down

27 мар 2020 г. из Tom Chai

@tomchai @yootzmedia @jaderichards Is it plastic, or is it rubber? Rubber would have a lower melting point, right (correct me if I'm wrong) ? Thanks :)

28 мар 2020 г. из Joseph Prekins

Plastic. In my opinion, don't do this repair, you'll lose too much for just a cosmetic scuff.

28 мар 2020 г. из Tom Chai

Its a hard plastic in my opinion but is the frame of the whole screen tacked onto the inner metal frame of the screen.

2 апр 2020 г. из Jade Richards

Добавить комментарий

Jade Richards @jaderichards Репутация: 223 4 1 · Answer 2 · 2020-03-24T17:39:54-07:00

Jade Richards @jaderichards

Репутация: 223

4

1

Опубликовано: 24 мар 2020 г.

Опции

The piece you are talking about is the bracket that holds the lcd and glass together and holds the screen in place in the phone.

When you replace the screen these are already pre built on the screen. You could choose to replace it but that requires lots of heat and a very steady hand.

Best thing to do is to replace the screen.

Был ли этот ответ полезен?

Да Нет

Оценка 1

2 Комментариев:

Is this "bracket" plastic, rubber, or a composite? I'm curious. This could affect how I heat it. Am trying to be careful.

Thanks a lot :)

27 мар 2020 г. из Joseph Prekins

It's a rubber meant to absorb energy from impacts to protect the screen.

27 мар 2020 г. из TheYootz Media Group

Добавить комментарий