Перейти к основному содержанию

27" display with 2560 x 1440 pixels resolution Thunderbolt & MagSafe cable attachments

160вопросов Показать все

Green display on turn off, clearing after 10-15mins

I have had my thunderbolt display for a while and no issues until one day it seems to click, and the green appeared.

After about 10-15mins it disappears and the screen is back to normal.

The green is all over with what looks like some image persistence at the sides.

I have stripped the display back but could see anything obvious then wasn’t sure what to look for. I gave everything a clean with a blower, a long shot but no joy…

Any advice welcome.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

Наиболее полезный ответ

Try cleaning the connections with a qtip and alcohol and a soft brush, there might be corrosion just from the humidity in the air.

Update (05/21/2020)

If you open it up it should have a connection where you can change the screen.it should be internal. I use Rubbing alcohol as high of a percent of alcohol.

Был ли этот ответ полезен?

Оценка 1

2 Комментариев:

Hi Allan, thanks for coming back. Which connections? And what alcohol is best?

из

Done and unfortunately no change...

из

Добавить комментарий

Добавьте свой ответ

James будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 1

За всё время: 35