Перейти к основному содержанию

Repair guides and support for your LG TV.

1330вопросов Показать все

LG 60pa6550 plasma tv display issue

Hello I have a LG60pa6550 Plasma TV. The TV will work fine and I can leave it on for 24 hours or it seems indefinitely without issue. I can also turn the tv off and back on without issue if done within a short period of time. However If the TV is off for a few hours the screen will not display for 24+ hours. I have both left tv unplugged and plugged in but off and I still have to wait over 24+ hours for the tv screen to display again. I opened the back and could not find any bulged capacitors. When the tv is turned on, I can hear sound but no display. At times if I do not wait the sufficient time, the tv will display for a few minutes but turns itself off /standby mode, when I press power again the tv will turn on and I will have sound but no display and simply have to wait with tv off for 24+ hours for it to work normally. When I unplug the television and wait 24+ and plug it back, at times the Tv panel will glow for about a second, when this occurs the tv works fine. If I plug it back in and the panel does not glow for a second the tv will not display.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 1
Добавить комментарий

1 ответ

Наиболее полезный ответ

@wishwash the issues with a delayed start is usually related to some power transistors (FET) that have failed etc. Take a good look at the power board and check both sides for any evidence of arcing (i.e. burn marks etc.) For now this does sound like a power supply issue. You can always post some pictures of your boards with your question so that we can see what you see. Adding images to an existing question

Был ли этот ответ полезен?

Оценка 1
Добавить комментарий

Добавьте свой ответ

wishwash будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 1

За всё время: 357