Перейти к основному содержанию

2.5 GHz dual-core Intel Core i5 processor (Turbo Boost up to 3.1 GHz) with 3 MB shared L3 cache.

265вопросов Показать все

No WiFi or Bluetooth after replacing battery and speakers

I’m not sure where to begin looking for the problem. Can someone point me in the right direction? I have no Wi-Fi or Bluetooth after replacing the battery and speakers on my MacBook Pro 13 inch retina late 2012 laptop. I followed the tutorial exactly and did not seem to have any problems during the repair.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

2 Ответов

Наиболее полезный ответ

Either the I/O board cable or the I/O board its self has an issue

MacBook Pro 13" Retina (Late 2012-Early 2013) I/O Board Data Cable

MacBook Pro 13" Retina (Late 2012-Early 2013) Right I/O Board

Here’s the guide MacBook Pro 13" Retina Display Late 2012 I/O Board Replacement

MacBook Pro 13" Retina (Late 2012-Early 2013) Right I/O Board Изображение

Продукт

MacBook Pro 13" Retina (Late 2012-Early 2013) Right I/O Board

$49.99

MacBook Pro 13" Retina (Late 2012-Early 2013) I/O Board Data Cable Изображение

Продукт

MacBook Pro 13" Retina (Late 2012-Early 2013) I/O Board Data Cable

$4.99

Был ли этот ответ полезен?

Оценка 1

3 Комментариев:

I’m an amateur here so I really appreciate your time. I made sure all cables were reconnected properly. In your opinion should I proceed with replacement of the recommended items? I was extremely careful when I replaced the battery so I don’t think I damaged anything. Are there any other things I should check first? The only other ‘symptom’ before I replaced the battery was occasional difficulty getting the laptop to connect to a Bluetooth speaker. It would sometimes take multiple attempts to connect with no apparent cause. Thanks again.

из

Try reseating the I/O cable, if that fails replace it and test again.

из

Will do thanks!

из

Добавить комментарий

I’m having this same issue. Did you solve it in the end?

Был ли этот ответ полезен?

Оценка 0

1 Комментарий:

@henrychugh26 - Did you try resetting the cable and if that didn’t help replace the cable. 40% of the time reseating fixes it and the other 40% replacing is needed. And lastly 20% the board is corroded up.

из

Добавить комментарий

Добавьте свой ответ

Angela Desjardins будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 2

За последние 30 дней: 7

За всё время: 511