Перейти к основному содержанию

The Ninja Mega Kitchen System BL770 is a complete kitchen appliance manufactured by SharkNinja.

11вопросов Показать все

Replacing broken plastic gears

Our Ninja BL700 stopped spinning. I disassebled the unit and the plastic 3 gear unit at the top had shredded teeth not allowing the unit to spin. Ninja does not offer a replacement part but saud I can purchase a replacement base. Does anyone know where I can purchase the part. An internet search has not been fruitful. Thank you.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

If you are talking about the gear-looking part on the drive shaft that meets with the bottom of the blade assembly, it is called a coupler or coupling. I haven't found one for Ninja, but there are a lot for kitchen aid and waring around. I would wonder if one of these is 'compatible'.

Example: https://www.ereplacementparts.com/coupli...

Update (10/17/2020)

Similar question: The flexable rubber coupler has broken..

In that, this guide is referenced which includes a rebuild of the planetary gear assembly. I see now this is what you really needed

https://sites.google.com/site/dgeake51/h...

Был ли этот ответ полезен?

Оценка 0

3 Комментариев:

No. It is the gear unit that turns the coupler.

из

Broken 3 gear unit that turns the coupler.

из

Добавить комментарий

Добавьте свой ответ

Tim Strickland будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 7

За последние 30 дней: 28

За всё время: 1,105