Перейти к основному содержанию

The Sony Playstation 2 SCPH-790xx is the fourth revision of the Playstation2 slimline model.

11вопросов Показать все

New PS2 Slim laser won't travel on rail.

I've installed a new laser in my PS2 Slim, but it hits a hard stop point halfway when traveling on the rail and won't read discs.

I have removed the solder blob, so the disc spins but the laser can only travel on the inner or outer portion of the rail and hits a hard stop when trying to move further. I've replaced two lasers before with no issue, this is a first for me seeing this issue.

Update (11/12/2020)

Block Image

Here’s an image of the bottom of the defective unit for reference. The new working laser I received didn’t have these.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

Наиболее полезный ответ

I looked more closely at the issue and found that on the return sensor for the new laser I received there were two metal tabs extending from the bottom. They weren’t very long but long enough to hit the ribbon when traveling out or back to center. I took and filed them down, but had other issues with the laser so I had the seller send another. Sure enough the new unit arrived the next day and didn’t have these two metal contacts. It’s like the new laser was from a completely different batch and just works great (without stopping halfway along the rail).

Был ли этот ответ полезен?

Оценка 1
Добавить комментарий

Добавьте свой ответ

Nick Jones будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 4

За последние 30 дней: 14

За всё время: 1,115