Перейти к основному содержанию

Выпущен 16 сентября 2016 года. Модель 1660, 1778. Стандарты связи GSM или CDMA. Память 32, 128 или 256 ГБ. Цвета: розовое золото, золотой, серебристый, черный и глянцевый черный.

2261вопросов Показать все

iPhone 7 (intel) A1778 no backlight troubleshooting help

hello. i have an iphone 7 logic board that does not have backlight, i put it in a functioning iphone 7 with a functioning original screen and the backlight does not work (i can see the apple logo and the hello (i yet have to activate this one))

my troubleshooting: i put in the usb powermeter and it draws 1.5amps, tried to boot and i hear vibration and sound. connecting to itunes/3utools i get detected. so i checked with torchlight and see that it has display but no backlight

further troubleshooting: i took off the motherboard and checked with multimeter the J4502 connector pins 35 37 39 with diode mode with the red on ground and got 0.6v on each of them, i went further and check the with diode mode the 3 filters (fl3901, fl3902, fl3903) and all 6 pins had a reading (something like 0.59v).

i have done also the diode mode from tp0409 to c3904

Block Image

from tp0410 to c3905

Block Image

and from d3702 to c3725

Block Image

and got 0v, which i think should be alright ( the start of the arrow in the img is where i put the red probe of the multimeter)

now: i am stuck, i dont know how to further troubleshoot this. i have a pretty cheap microscope for visual inspection, and seems to me that the c3903 is missing, but watching many many videos of iphone7 backlight repairs seems to me that the c3903 is missing everywhere (or i cant see because of low quality video). i also have some iphone 6, 5s and 5 donor boards, and a hot air station (no soldering iron yet. though is on its way, arriving later this week). if there is a way to maybe grab a missing component from these boards i am happy to do so

does anybody have an idea on how should i go further?

many thanks for anyone

edit:

further testing: i opened the good iphone logicboard, and checked if there is the c3903 capacitor and it seems to me that there is not

Block Image

1 is c3939

2 is c3905

3 is where in the schematics the c3903 seems to be

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 0
1 Комментарий

How did you get voltage in diode mode.

из

Добавить комментарий

2 Ответов

Выбранное решение

On j4502 what diode readings do you get on pins 35, 37, 39. Red probe on ground.

Был ли этот ответ полезен?

Оценка 1
Добавить комментарий

pin35:

Block Image

pin37:

Block Image

pin39:

Block Image

i said volts because i see the V in the upper of the screen

the board is outside of my phone, nothing connected to it

Был ли этот ответ полезен?

Оценка 0

3 Комментариев:

Have you tried changing u3701

из

not yet. i’d like to be have a bit of confirmation before i start swapping chips. but everything points there, i will swap it tomorrow morning if no other solutions arrive. ty

из

ok i swapped chips and now it doesnt draw current, i think i fried some components. the chip took sooooo long to get out (used 320-350 celsius) for i think 2-3 min. it’s midnight here, tomorrow morning i will do other troubleshooting, for more problems.....

из

Добавить комментарий

Добавьте свой ответ

Gyca Popescu будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 5

За всё время: 250