Перейти к основному содержанию

Model A2159, EMC 3301. A refresh of the entry-level 13" MacBook Pro. Available in Silver and Space Gray. Released July 2019.

81вопросов Показать все

Display becomes black after a minute or more

MBP model is A2159. I am able to view the login screen properly upon opening the lid. I can type in the password and can reach the home screen.

Block Image

Block Image

After some time (the shortest being 5 seconds and the longest being 1 minute) the screen goes black with blueish vertical lines as shown below.

Block Image

During this time the screen stays undisturbed. Every time I open the lid the display shows up correctly and then goes black. What can be the issue here?

  1. Can it be a display (LCD) issue?
  2. Can it be a problem with the flex cables?

The screen that I am getting is similar to the issue posted here: Black screen with blue vertical lines on MacBook Pro

Appreciate if someone could help me on this.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

Your issue is not the flex cables, what you are seeing is the screen resolution change from the lower clocking to the higher clocking. What happens is the T-CON logic which is part of the display assembly can’t comply to the logic boards change so you get this image.

Basically the display assembly has failed ;-{

To prove it connect an external display it should work with no issues while your internal ends up being a black screen.

MacBook Pro 13" Retina (Mid 2018-Mid 2019) Display Assembly and here’s the guide to put it in MacBook Pro 13" Two Thunderbolt Ports 2019 Display Assembly Replacement

MacBook Pro 13" Retina (Mid 2018-Mid 2019) Display Assembly Изображение


MacBook Pro 13" Retina (Mid 2018-Mid 2019) Display Assembly


Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

Harikrishnan A S будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 4

За последние 30 дней: 10

За всё время: 105