Перейти к основному содержанию

Model No. A1367 / 8, 16, 32, or 64 GB capacity

913вопросов Показать все

Power/Sleep and Home Button Unresponsive

I have a iPod Touch 4g which has a cracked screen. I replaced it, and still didn't put it back. I attached the two wires from the screen to the iPod, and now the Power Button and touch screen are not working. I plug in my charger, and it goes to the password screen, and I can't slide it.

How can I fix this?

EDIT: The volume button also don't work :/

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка -1
Добавить комментарий

2 Ответов

Наиболее полезный ответ

Assuming that everything worked well before, the #1 culprit for malfunctioning electronics after dis-assembly tends to be dirty or poorly seated connectors. Clean everything well with a high-content rubbing alcohol and make sure the connectors are seated fully. If that all checks out, closely inspect each of the connectors and see if a pin was damaged. Good luck and let us know what you find!

Был ли этот ответ полезен?

Оценка 1

1 Комментарий:

I tried this, and now the display doesn't light up anymore when I plug the charger in :(

из

Добавить комментарий

It is most definitely a damaged on/off, volume flex cable. There is a post elsewhere on this site.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

Cytonic будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 998