Перейти к основному содержанию

iPod Classic 6th Generation. Model A1238 / 80, 120, or 160 GB hard drive / black or silver metal front

904вопросов Показать все

Lid won't fit after replacing battery

We have the Late 2008 (7th Gen) 160gb version. We installed the correct ifixit battery thick, as only devices from 2009 are thin.

However, when putting the housing together it will not go all the way down at the top.

Anyone else ran into this?

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

It looks like you got a battery for the 160gb thick model from 2007 (6th gen), and yours might be 2009 model (7th gen) is slimmer. You need to check which model you have by pasting your iPod's serial number on this site: http://www.chipmunk.nl/klantenservice/ap.... It'll show you info about your iPod's production date and generation, from which you can tell which model is it.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

bpatel будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 1

За всё время: 39