Перейти к основному содержанию

CDMA версия четвертого поколения iPhone. Ремонт прост, но дисплей должен быть заменен в сборе с сенсорным стеклом. 16 или 32 ГБ памяти / Модель A1349 / Cовместимость с CDMA.

295вопросов Показать все
Вопрос закрыт

Backlight only, no LCD after screen placement

Replaced my LCD and Digitizer and now only the backlight works. Don't think I messed up the ribbon or anything else but maybe I did. Was thinking maybe I accidentally got sent a replacement for an AT&T phone instead? Do we know if screens are compatible for both Verizon and AT&T?

Thanks in advance!

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 0
2 Комментариев

i have the same problem ideas?

из

Jake - You wrote a comment in the place reserved for Answers only. Please use the Add Comment link, or start a new Question of your own.

из

Добавить комментарий

2 Ответов

Выбранное решение

I think I just ended up buying a really cheaply made one on ebay... Two more screens later my phone is working perfectly fine. Word of advise, don't buy the cheap screens on ebay...

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Check out THIS guide and recheck the connector in BLUE in step 15. IT may just need to be reseated again

HIH

Был ли этот ответ полезен?

Оценка 0

3 Комментариев:

I tried... no luck. anything else it could be? is the AT&T screen compatible with a verizon phone?

из

the AT&T and Verizon screens appear to be different.

Do you think you have the wrong screen?

Please don't ACCEPT answer if it didn't fix problem - an ^ up-vote is always appreciated though :)

из

THIS Article may be worth reading too

из

Добавить комментарий
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 1,818