Перейти к основному содержанию

Model A1312 / Mid 2010 / 3.2 GHz Core i3 or 2.8 & 3.6 GHz Core i5 or 2.93 GHz Core i7, ID iMac11,3

382вопросов Показать все

Vertical Red Line on LCD

I have a vertical thin red line running from the top of my Imac LCD screen to the bottom. It is about 4" from the left side of the monitor. It is thinner than a typical human hair. I ran the start-up boot disk and it did not disappear, so I believe it is hardware related. Any help on this matter is greatly appreciated.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 1
1 Комментарий

Thank you very much for your response.

из

Добавить комментарий

1 ответ

Выбранное решение

It never pays off for me to answer these kinds of questions, in the answer box. 95%+ chance the problem is a capacitor or inductor filtering the signal or a transistor going out on the LCD controller board attached to the LCD. Most places that work on LCD TVs should be able to fix it for less than the price of replacing the LCD screen. The alternatives are live with it or replace the LCD screen.

Был ли этот ответ полезен?

Оценка 7

2 Комментариев:

it paid today ;-)

из

dear sir, i have same problem, one fine red vertical line on imac screen in left side as discussed by ssgeraci. my imac is Mid 2011 ,A1311 with i5 processer, evrythin is fine and running well. past two years i am having this red vertical line on my imac screen, its juat stays there. i checked this imac connecting to another display through display port cable and vga adapter and in that display there is no red vertical line. it means the there is a problem in my imac lcd display. pls suggest about this issue. thank you

из

Добавить комментарий

Добавьте свой ответ

ssgeraci будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 1

За последние 30 дней: 9

За всё время: 4,371