Перейти к основному содержанию

Выпущено 21 сентября 2018 г. Модели A1921, A2101, A2102, A2104. Доступен как GSM, CDMA / eSIM или nano-SIM / 64, 256 или 512 ГБ / серебристый, золотой или космический серый. (Произносится как «iPhone 10 S Max.»)

372вопросов Показать все

Replaced charging port, still rebooting

Yah so had a charging port panic full prs0 whatever you call it, i replaced the charging port, and nothing has changed, did i less up? Is it a bad part, is somthibg blocking the sensor? Please help, thabks guys (and gals)

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 2
5 Комментариев

Iphibe xs max

из

Nate dog, can you screenshot or copy/paste the text of the panic log so we can see what you see?

из

Yessir one moment

из

Jerry, do you have tellegram?

из

@natedawg22, no, I'm afraid not. I was suggesting posting it here so we can all see the text of the error message; there are several people on here who are very experienced in dealing with kernel panics who might be able to help.

из

Добавить комментарий

2 Ответов

Наиболее полезный ответ

If the issue is the PRS0 sensor, that’s the pressure sensor (barometer). It has a pretty recognizable appearance on the charge port assembly. When I buy these, I generally make sure I get them from reputable vendors, or ones with a documented warranty or return policy. I have seen shoddy cables of all sorts, but testing in a known good housing, or with a known good charge port would be a good start.

Block Image

If it still does this with a known good, charge port, then you may be looking at a board problem.

iPhone XS Max Lightning Connector Assembly Изображение

Продукт

iPhone XS Max Lightning Connector Assembly

$24.99

Был ли этот ответ полезен?

Оценка 2

2 Комментариев:

Ok question, for the little hole where the sensor goes, any adivce? How do i get it in there? Should i glue it in? Should it stick by itself? What glue? Should i be carefull not to do somthing? Thx boss

из

Also does the port flexes/black sheet stuff have to blue glued diwn in anyway for me to test?

из

Добавить комментарий

Did you use an original chargeport? And try to disconnect all flexcables except the on/off flex. If it restarts, add one flex at the time until you found the problem.

Был ли этот ответ полезен?

Оценка 0

1 Комментарий:

Also where can i get an original flex cable?

из

Добавить комментарий

Добавьте свой ответ

Nate dog будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 4

За последние 30 дней: 10

За всё время: 252