Перейти к основному содержанию

Обновленная версия iPhone 3G с более высокой скоростью обработки. Ремонт этого устройства схож с iPhone 3G, и требует простых отверток и инструментов для вскрытия. Модель A1303; 16 или 32 ГБ памяти; с Черной или Белой задней пластиковой крышкой.

1500вопросов Показать все
Вопрос закрыт

Replacing Cable #1 on 3GS Screen

I have several 3GS' in various states of repair. One has a functioning LCD and digitizer, but the connection on the #1 cable at the top of the screen doesn't hold. The connection on the board is ok (works with other screens) but not on the LCD.

I have a broken LCD with a good #1 cable. Is there any way to port the cable from that LCD to the good LCD? That would be cheaper than $100 for a new LCD.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

Выбранное решение

Why do that when you can just remove the LCD from one and transfer it to the other? 6 screws to hold the LCD to the midframe, remove those and do the swap. Then crack open a beer to celebrate.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 1,122