Unvoluntary double clic and can't hold clics

anyone have a teardown for the top plastics to replace the rmb/lmb switches?

its not a setting in software, its a physical problem with the buttons

i managed to get it apart and replace the switches (this solved the problem)

there were 3 hidden screws that hold the battery compartment plastics

and then 4 screws to remove the button plastics, and 2 more screws to hold movement limiters

then 2 screws for each of the rmb/lmb button pcb

then unsoldering and replacing the switches was an easy task

also repaced the forward/back buttons while in there, since tha was only 1 more screw for their pcb hold down

Hi Luisa,
I also have the same problem with my G305. The timing couldn't be so odd.
I suspect it might be something with the software driver because mine, too, was very lightly used.
I would try to uninstall the GHUB software, and rollback to whatever the on-board/default driver of the G305.

You need to buy new switches for l the mouse unsolder the old switches and then solder new one to replace defective one it's pretty easy if you know how to solder and desolder but could be tedious otherwise I did it for 2 305 mouse and upgraded the switches for better quality ones it's pretty much the only thing that will fail on the 305 since they cheaped out on the quality of the switches for that model