Digitizer not functioning well.

Question

iPhone 4

Четвертое поколение iPhone. Ремонт прост, но дисплей должен быть заменен в сборе с сенсорным стеклом. Версия GSM; 8, 16 или 32 ГБ памяти; модель A1332; в Черном или Белом цвете.

2375вопросов Показать все

Вопрос закрыт

SIMRAN @simransingh

Репутация: 6,3к

24

39

5

Опубликовано: 4 апр 2012 г.

Опции

Digitizer not functioning well.

iphone4 16gb stop responding to touch after talked on the phone. it was working well before i listened to call for near about 40min. after disconnecting the call touch of phone not working. i restored the phone 2 times. check the internals . nothing found out. changed the screen 3 times from the market and 1 from the working phone. touch of this phone is working in another phone but not in this phone. i takes out the logic board and remained un contacted from battery for 30 mins but still same . logic board looks fresh. phone never opened before. i checked only. help.........

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

1 ответ

Выбранное решение

Nick @nick

Репутация: 88,8к

195

260

144

Опубликовано: 11 апр 2012 г.

Опции

First, this is going to need a new display assembly. If that doesn't work, then it's the motherboard in the phone, or simply a defective replacement. Get another one if this is the case to confirm.

iPhone 4 Display Assembly Replacement

Should this be the motherboard, don't bother fixing it. The boards cost more then a phone and you have to be careful, since some of them are IMEI/ESN blocked. You can't verify a lot of these, since some sellers don't know or evade the question for obvious reason. I wouldn't bother.

They can also cost more then the phone is worth at times.

Был ли этот ответ полезен?

Да Нет

Оценка 1

5 Комментариев:

i changed so many . the problem is in the logic board . have any idea ? i found 2 chips are responsible for this but very hard to get that .

11 апр 2012 г. из SIMRAN

You need to know compoent level soldering, whicj is that tough

12 апр 2012 г. из Nick

yup i will try with that . otherwise last option is to replace the logic board

12 апр 2012 г. из SIMRAN

like I said, you need to compare the cost and find the best deal, DO NOT buy used boards due to the IMEI block risk, only time you do is if you get a cracked 4 on craigslist and it is not stolen, and the IMEI is clean and checkable

12 апр 2012 г. из Nick

Here in india apple is replacing the phone on chargeable basis. i will go there becoz they are giving a new phone. then thats it the better option.

12 апр 2012 г. из SIMRAN

Добавить комментарий

i changed so many . the problem is in the logic board . have any idea ? i found 2 chips are responsible for this but very hard to get that . — SIMRAN
You need to know compoent level soldering, whicj is that tough — Nick
yup i will try with that . otherwise last option is to replace the logic board — SIMRAN
like I said, you need to compare the cost and find the best deal, DO NOT buy used boards due to the IMEI block risk, only time you do is if you get a cracked 4 on craigslist and it is not stolen, and the IMEI is clean and checkable — Nick
Here in india apple is replacing the phone on chargeable basis. i will go there becoz they are giving a new phone. then thats it the better option. — SIMRAN