MacBook works with power cable plugged in, but not on battery power.

Question

MacBook Core 2 Duo

Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1203вопросов Показать все

Jem Adkins @jemadkins

Репутация: 9

1

Опубликовано: 16 фев 2010 г.

Опции

MacBook works with power cable plugged in, but not on battery power.

Battery works fine in other machines. When power cord is plugged in the cable shows green (battery full), but battery indicator icon on screen shows no battery inserted. If I power off I still get same green indicator, until I close lid on MacBook, which then the battery starts to charge. Any ideas? Jem

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка -1

1 Комментарий

ps. This was after a liquid spill. It's had full stripdown and clean with isopropyl alcohol spray.

16 фев 2010 г. из Jem Adkins

Добавить комментарий

2 Ответов

Выбранное решение

lemerise @lemerise

Репутация: 37,6к

315

66

72

Опубликовано: 16 фев 2010 г.

Опции

Hi Jem,

You may try to replace the battery connector/sleep sensor board. If it doesn't work then the logic board could be faulty. It's a common issue after the a liquid spill. The battery charging system is often affected. I had the same problem with a MacBook after a spill and the logic board had to be repaired.

MacBook Battery Connector/Sleep Sensor (Energy Star)

Был ли этот ответ полезен?

Да Нет

Оценка 2

Добавить комментарий