Перейти к основному содержанию

Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

548вопросов Показать все

Three beeps when power connected. Tried new RAM, more info inside.

No matter what configuration I have, the computer starts up when the power is plugged in. Without hitting the power button.

With the original 1GB stick of RAM in it, it gives 3 short beeps, 3 long beeps, then 3 short beeps. A short pause, then repeats. The internal diagnostic lights have 1, 2, and 3 on solid with each case.

I've tried many different types of RAM (all 1GB modules), and here's my results:

444MHz: 3 short beeps repeating

555MHz: sometimes 3 short, sometimes 3-3-3

666MHz and 800MHz doesn't give video or beeps, but does power on

I've also pulled the CMOS battery for 20 minutes and it resulted in no change.

I've used an air compressor to dust out the RAM slots as well.

Any help would be greatly appreciated.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка -1
Добавить комментарий

2 Ответов

Выбранное решение

https://discussions.apple.com/thread/367...

3 long tones, 3 short tones, 3 long tones Firmware restoration from CD in process. See About the Firmware Restoration CD (Intel-based Macs) for more details. Follow these directions for doing a firmware restoration: http://support.apple.com/kb/HT2213

Был ли этот ответ полезен?

Оценка 3

1 Комментарий:

I didn't mention it above, but I did try that. It just continues to beep and after a few seconds ejects the disc.

Nothing shows up on the screen at all, in any scenario.

из

Добавить комментарий

replace the battery

that works for me and few others

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

comprenwilmington будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 924