Which parts are required to complete a screen replacement

Question

iPad 3 4G

Third generation of iPad, featuring 4G capabilities, released on March 16, 2012. Model number A1430. Repairs require heat and careful prying.

106вопросов Показать все

jwesleym @jwesleym

Репутация: 1

1

Опубликовано: 15 мая 2012 г.

Опции

Which parts are required to complete a screen replacement

I have replaced the digitizer on a few iPad 2nd gens. I typically replace the middle frame bezel every time I replace the digitizer. I haven't been able to find replacement middle frame bezels for the new iPad. I was wondering if the iPad 2 bezel would fit, since the old one typically gets some minor damage during removal of the digitizer. Also, is the adhesive similar between the generations?

-Thanks,

jwesleym

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка -1

Добавить комментарий

3 Ответов

Выбранное решение

annon201 @annon201

Репутация: 43

2

Опубликовано: 20 мая 2012 г.

Опции

I just did an iPad 3 Screen replacement,

For the most part, the replacement is about the same - and most of the adhesive is the same too (there are a couple of bits different, but nothing that should affect anything). The part I ordered came with the plastic bezel, I do not know how similar it is to the iPad 2 as I have never replaced the bezel with the screen in the iPad 2.

-David

Был ли этот ответ полезен?

Да Нет

Оценка 1

1 Комментарий:

How much does the screen cost?

27 июн 2012 г. из ken kenequon

Добавить комментарий