Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Обновленная версия iPhone 3G с более высокой скоростью обработки. Ремонт этого устройства схож с iPhone 3G, и требует простых отверток и инструментов для вскрытия. Модель A1303; 16 или 32 ГБ памяти; с Черной или Белой задней пластиковой крышкой.

1972вопросов Показать все

Dock Connector Causing no Power or MB?

HI,

So my water damaged iPhone came today, and I figured I would go with the water damage repair with the IPA. But, upon further investigation, the water damage dots on the MB shields and in the headphone jack are both white. The dock connector board one is red. I bought it water damaged from a phone repair company (didn't notice that until I bid...). It won't charge, won't come on. It has a new battery, and it appears as if the shields have been removed to do the IPA treatment, as the "band-aid" sticker thing that goes over both shields is missing.

Should I replace the dock connector, or should I clean the MB first? I figure if I choose wrong, I either waste money on a part I don't need, or damage the MB further.

Thanks

--Corry

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

Выбранное решение

Hey Correy,

As long as you allow the MB to completely dry after soaking it in IPA, you shouldn't have any risk of damaging it. Liquid damage mainly occurs when there is a drop on the board that causes a short. As long as there is no liquid on the board when you run power through it, you cannot further damage the device with IPA. I would thoroughly clean the device before purchasing/installing any parts.

Hope this helps. Good luck!

Был ли этот ответ полезен?

Оценка 2

Комментарии:

Will do, thanks

из

Добавить комментарий

Добавьте свой ответ

Todd будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 324