Перейти к основному содержанию

2.26 or 2.4 GHz / White plastic unibody enclosure

645вопросов Показать все

Won't boot - at all

I have a MacBook Mid-2009 2.1 GHz.

I've tried booting (with power adapter connected) from the internal and a bootable external HD, also a Leopard DVD. In each case, the white light on front of case comes on, it hums a bit, a click or two, then nothing (but the light stays on). Never a startup chime, and the display remains black.

User reports that it worked fine until... it wouldn't start. I've removed the HD, put it in a Voyager enclosure and it mounts to another Mac no problem (but I haven't booted another machine from it). I suspect some sort of power issue, but basically don't know what to try next, and am looking for suggestions.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка -1
Добавить комментарий

1 ответ

Выбранное решение

The number of, flashing lights/beeps can indicate potential problems, so can booting to the Hardware Test Disk. Pull all the RAM you should get RAM failure beeps... if you don't I'd think logic board issues. Also look at some of the Answers from the Tags on the right.

''If this answer was helpful please remember to return an mark it Accepted.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

David A будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 379