This translation may not reflect the most recent updates from the source guide. Help update the translation or view the source guide.
Введение
便宜的烟雾器因为质量差常常容易损坏。多数故障可以轻松修复。这份指南可用于维修这类烟雾器最常见的毛病。
我修的烟雾器名字叫做 'eurolite n-19'，但也可能以别的名字出售。
Выберете то, что вам нужно
重新组装你的设备，请反转以下步骤的操作顺序。
重新组装你的设备，请反转以下步骤的操作顺序。
Отменить: Я не выполнил это руководство.
7 участников успешно повторили данное руководство.
Особая благодарность этим переводчикам:
45%
Эти переводчики помогают нам починить мир! Хотите внести свой вклад?
Начните переводить ›
23 Комментариев
My fogger heater is jam how can I clean it?
hmm… I think I could have written a better guide myself. Okay so I have a 3 pin XLR for phase does anyone know how this works also I noted that the fuse was melted into its holster and the pump seems dead. My Fogger also has some kind of potentiometer which controls the heating element which is like a ceramic sandwich and two spark plugs… I also was wondering if glycerin fog juice can be made with vegetable glycerin or the glycol type or if this is what cloggs the machine. Also will clr work or be dangerous fume wise? Can you market glycerine as fog juice thickener like STP fuel additives for cars?? g0pg.xyz is my website you can learn how to force push graphite if you look for the post with yoda!
Where can I buy a fuse like this? Have looked over the net, but could not find any shops that would sell CH-15 fuse, used in this fog machine. If anyone knows about this, please share info. Thanks! By the way, I’m based in EU.
I would make a post on Halloweenform.com
My fog machine is not pumping out smoke
