Выберете то, что вам нужно
-
-
Using a Spudger, gently pry up the keyboard.
-
-
-
Rotate the keyboard to face downward.
-
Pull out the blue wiring connection. Use tweezers to make it easier to remove.
-
-
-
Use the Phillips #0 screwdriver to remove the two screws on the back of the laptop.
-
-
-
-
Remove all screws located on the bottom plate of the laptop, beginning with the three located underneath the disc drive.
-
-
-
Rotate the laptop until it is sitting face up and extract all screws exposed by removing the keyboard.
-
-
-
Pull up on the front panel using the spudger until the front panel separates from the bottom panel.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Команда
University of North Texas, Team S6-G2, Thompson Fall 2018 Участник University of North Texas, Team S6-G2, Thompson Fall 2018
UNT-THOMPSON-F18S6G2
4 членов
Автор 6 руководств
