Введение

The stand supports the monitor from falling over.

Запчасти

Lay the monitor on a flat surface so that the back is facing up.
  • Lay the monitor on a flat surface so that the back is facing up.

Добавить комментарий

Grab the hinge cover with both hands on either side of the stand.
  • Grab the hinge cover with both hands on either side of the stand.

  • Squeeze inwards with your thumbs and fingers and lift up to remove the hinge cover.

Добавить комментарий

  • Remove the four 12.1 mm Phillips #2 screws that hold the stand to the monitor.

  • Support the monitor while removing the screws to prevent the monitor from falling.

  • Lift up to detach the stand.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

4 участников успешно повторили данное руководство.

Keith

Участник с: 06.10.2011

261 Репутация

Автор 4 руководств

Команда

Cal Poly, Team 20-26, Maness Fall 2011 Member of Cal Poly, Team 20-26, Maness Fall 2011

CPSU-MANESS-F11S20G26

4 членов

Автор 7 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 6

За 7 дней: 60

За 30 дней: 222

За всё время: 4,036