Перейти к основному содержанию

Введение

Hard drives store all your data, but they are slow and can fail. This guide will show you how to replace a broken or slow hard drive with a different hard drive or solid state drive.

  1. Unscrew the single (5mm) Philips head screw holding the drive in place.
    • Unscrew the single (5mm) Philips head screw holding the drive in place.

  2. Pull out the optical drive.
    • Pull out the optical drive.

  3. iPhone Battery Fix Kits

    Only $29.99

    Buy Now

    iPhone Battery Fix Kits

    Only $29.99

    Buy Now
  4. Unscrew all 17 (5mm) Philips head screws from the bottom. Unscrew the 3 (2.5mm) Philips head screws underneath the optical drive.
    • Unscrew all 17 (5mm) Philips head screws from the bottom.

    • Unscrew the 3 (2.5mm) Philips head screws underneath the optical drive.

  5. Run a pick around the edge of the laptop (between the two parts) to open it. Lift the left side of the case up and unplug the speaker cable before fully taking the bottom off.
    • Run a pick around the edge of the laptop (between the two parts) to open it.

    • Lift the left side of the case up and unplug the speaker cable before fully taking the bottom off.

  6. Remove the hard drive by pulling it out to the left.
    • Remove the hard drive by pulling it out to the left.

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Alex Bahm

Участник с: 18.01.2018

1 445 Репутация

Автор 6 руководств

Команда

Cal Poly, Team S12-G5, Banghart Winter 2018 Member of Cal Poly, Team S12-G5, Banghart Winter 2018

CPSU-BANGHART-W18S12G5

3 членов

Автор 13 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 3

За 7 дней: 23

За 30 дней: 142

За всё время: 1,764