Перейти к основному содержанию

Введение

How to replace the SATA HDD Cable.

____________________________________________________________________________

Видео обзор

  1. Turn off the laptop and remove the battery. Remove two screws securing the Keyboard. The Keyboard is held by two locking clips, under the battery. Use the sharp tip of a plastic tool to release the keyboard.
    • Turn off the laptop and remove the battery.

    • Remove two screws securing the Keyboard.

    • The Keyboard is held by two locking clips, under the battery. Use the sharp tip of a plastic tool to release the keyboard.

  2. Remove the Keyboard and disconnect the two flex cables: Keyboard flex cable Keyboard Light flex cable
  3. Remove the screw securing the Optical drive and gently press the drive to show slightly as at the second pic. Slide the drive to the left and remove it. Slide the drive to the left and remove it.
    • Remove the screw securing the Optical drive and gently press the drive to show slightly as at the second pic.

    • Slide the drive to the left and remove it.

  4. Remove 4x phillips screws and disconnect: Power On button flex cable Touch pad flex cable
    • Remove 4x phillips screws and disconnect:

    • Power On button flex cable

    • Touch pad flex cable

    • Remove 18x Phillips screws from the bottom cover.

    • Remove any memory SD Card from the Card reader.

    • Start opening with a plastic opening tool.

  5. Carefully separate the upper cover and remove it. Carefully separate the upper cover and remove it. Carefully separate the upper cover and remove it.
    • Carefully separate the upper cover and remove it.

  6. Gently remove the HDD and disconnect the SATA cable from it. Please SUBSCRIBE to my channel  ツ Please SUBSCRIBE to my channel  ツ
  7. Remove one Phillips screw, securing th WLan card and disconnect the two coaxial antenna cables. Remove the Wi-Fi card.
    • Remove one Phillips screw, securing th WLan card and disconnect the two coaxial antenna cables.

    • Remove the Wi-Fi card.

  8. Remove the Memory Cover. Disconnect the Loudspeaker cable connector. Disconnect the Loudspeaker cable connector.
    • Remove the Memory Cover.

    • Disconnect the Loudspeaker cable connector.

  9. Remove two Phillips screw from the Mother board and from the Optical drive  SATA adapter. Disconnect the LCD Display flex cable. Disconnect the DC Jack cable.
    • Remove two Phillips screw from the Mother board and from the Optical drive SATA adapter.

    • Disconnect the LCD Display flex cable.

    • Disconnect the DC Jack cable.

    • Carefully remove the Optical drive SATA adapter.

    • We will disconnect the battery cable when we pick up the board.

  10. Carefully pick up the Mother board and disconnect the Battery cable. Carefully pick up the Mother board and disconnect the Battery cable. Carefully pick up the Mother board and disconnect the Battery cable.
    • Carefully pick up the Mother board and disconnect the Battery cable.

  11. 13 pin SATA HDD Cable Adapter. .
    • 13 pin SATA HDD Cable Adapter.

    • .

    • .

    • .

    • .

    • .

    • Did you do it successfully?

Заключение

To reassemble your device, follow these instructions in reverse order.

ZFix

Участник с: 09.12.2013

179 593 Репутация

Автор 323 руководств

Команда

Master Techs Участник Master Techs

Community

300 членов

Автор 1 005 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 2

За последние 7 дней: 9

За последние 30 дней: 28

За всё время: 3,849