Перейти к основному содержанию

Введение

How to remove and replace the Base Cover.

Запчасти

Детали не указаны.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Turn the computer over.

  2. Loosen the eight captive screws that secure the base cover to the computer base.
    • Loosen the eight captive screws that secure the base cover to the computer base.

  3. Lift the base cover off the computer base.
    • Lift the base cover off the computer base.

  4. Align the tabs on the NEW base cover with the slots on the computer base and place the base cover in position.
    • Align the tabs on the NEW base cover with the slots on the computer base and place the base cover in position.

  5. Tighten the eight screws that secure the base cover to the computer base.
    • Tighten the eight screws that secure the base cover to the computer base.

Финишная черта

2 участников успешно повторили данное руководство.

darrius

Участник с: 26.03.2018

5 183 Репутация

Автор 30 руководств

Команда

Informative Technologies Inc. Участник Informative Technologies Inc.

Community

38 членов

Автор 1 949 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 113