Перейти к основному содержанию

Altec Lansing OVO Bluetooth Speaker Disassembly

Выберете то, что вам нужно

  1. Altec Lansing OVO Bluetooth Speaker Disassembly, Altec Lansing OVO Bluetooth Speaker Disassembly: шаг 1, изображение 1 из 1
    • This is the unit that we are going to disassemble.

  2. Altec Lansing OVO Bluetooth Speaker Disassembly: шаг 2, изображение 1 из 1
    • Screws approximate location behind the front cover.

  3. Altec Lansing OVO Bluetooth Speaker Disassembly: шаг 3, изображение 1 из 1
    • Use a pick to gently pull the cover. There are no fragile parts. The cover is made of metal and covered with a type of mesh.

  4. Altec Lansing OVO Bluetooth Speaker Disassembly: шаг 4, изображение 1 из 3 Altec Lansing OVO Bluetooth Speaker Disassembly: шаг 4, изображение 2 из 3 Altec Lansing OVO Bluetooth Speaker Disassembly: шаг 4, изображение 3 из 3
    • Once the front cover is removed gently lift the thin protection layer in order to find the holes where the screws are located. In order to find the two middle screws you will have to make two small incisions as shown in the picture.

  5. Altec Lansing OVO Bluetooth Speaker Disassembly: шаг 5, изображение 1 из 2 Altec Lansing OVO Bluetooth Speaker Disassembly: шаг 5, изображение 2 из 2
    • After you remove the 13 screws, put your finger in the woofer hole on the back of the speaker. Pull gently outwards to make sure you don't break the flat cable that connects the back to the main board. And that's it! Now you have full access to all the inner parts of your speaker.

Заключение

To reassemble your device, follow these instructions in reverse order.

Особая благодарность этим переводчикам:

pt en

100%

Эти переводчики помогают нам починить мир! Хотите внести свой вклад?
Начните переводить ›

Nuno

Участник с: 03/02/22

181 Репутация

1 руководство автора

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 4

За последние 30 дней: 29

За всё время: 725