Этот документ имеет более свежие изменения. Перейти к последней непроверенной версии.
Введение
Here's how to take your mouse apart, and how to get the buttons working again.
Выберете то, что вам нужно
-
-
Use the screwdriver to peel off the stickers marked with red rectangles in the provided image. This will reveal the location of 4 screws.
-
-
-
Use a flat head screw driver to pry apart the upper and lower housing of the mouse.
-
-
-
-
Pull the wires from the white crimping headers to disconnect them, separating the top from bottom.
-
-
-
Scroll wheel between left and right buttons
-
Remove the scroll wheel from the mother board by pulling it to the left.
-
-
-
Desolder the components and re-solder the replacements in order to repair the left and right buttons.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
2 участников успешно повторили данное руководство.
Команда
Cal Poly, Team 1-39, Maness Winter 2014 Участник Cal Poly, Team 1-39, Maness Winter 2014
CPSU-MANESS-W14S1G39
4 членов
Автор 16 руководств
2 Комментариев
i bought the same mouse on amazon the same day i got it stopped working and anker was out of stock so i couldn't get another one directly from them, plus i really like it i opened up the mouse using your step by step and found the issue.
where can these replacement button switches be purchased….thanks ric
