Перейти к основному содержанию

Введение

This guide will show you how to replace the front button panel.

  1. Remove the plastic cover over the batteries on both sides of the device.
    • Remove the plastic cover over the batteries on both sides of the device.

  2. Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).
    • Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).

  3. PC Laptop Batteries

    An easy fix for a big power boost.

    Купить сейчас

    PC Laptop Batteries

    An easy fix for a big power boost.

    Купить сейчас
  4. Using the Philips Screwdriver, remove the top 2 screws.
    • Using the Philips Screwdriver, remove the top 2 screws.

    • The screws are very small (2.5mm), put them somewhere you won't lose them.

  5. Using the Philips screwdriver, remove the bottom 2 screws (2.5mm).
    • Using the Philips screwdriver, remove the bottom 2 screws (2.5mm).

  6. Remove the face. Remove the face.
    • Remove the face.

Заключение

To reassemble your device, follow these instructions in reverse order.

Bryant Bucci

Участник с: 21.03.2018

97 Репутация

1 Guide authored

Команда

IUPUI, Team S2-G3, Freund Spring 2018 Member of IUPUI, Team S2-G3, Freund Spring 2018

IUPUI-FREUND-S18S2G3

3 членов

Автор 2 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 4

За всё время: 74