Введение
To access your hard drive, remove the back plate as shown in these steps.
Выберете то, что вам нужно
-
-
With the computer upside down, lift up on the rubber cap on the back plate to access the captive Phillips #2 screw.
-
-
-
-
Pry around the edges of the plate using a plastic opening tool until the plate is removed.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.