Перейти к основному содержанию

Введение

The START/PAUSE/RESET buttons of the Atari 5200 controller can become unresponsive due to dirty/overused connections. Opening the controller and reseating/cleaning the interfaces to these sensors can improve the button's responsiveness.

Запчасти

Детали не указаны.

  1. Using a plastic or metal spudger, pry open the face of the button module.
    • Using a plastic or metal spudger, pry open the face of the button module.

  2. Take off the plate and the rubber buttons. Clean the exposed contacts. Reassemble by following the steps in reverse.
    • Take off the plate and the rubber buttons.

    • Clean the exposed contacts.

    • Reassemble by following the steps in reverse.

Заключение

Test the controller. If these step don't improve connectivity, take a look at the circuitry replacement guide.

Alan Abelson

Участник с: 26.09.2014

233 Репутация

Автор 5 руководств

Команда

USF Tampa, Team 13-1, Staggers Fall 2014 Участник USF Tampa, Team 13-1, Staggers Fall 2014

USFT-STAGGERS-F14S13G1

5 членов

Автор 16 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 2

За последние 30 дней: 8

За всё время: 813