Выберете то, что вам нужно
-
-
Lay the tablet down on a flat surface with the screen facing up, and the external camera facing upwards and closest to you.
-
-
-
Insert the plastic opening tool in the space between the screen and the back cover above the volume buttons.
-
Slide the plastic opening tool gently along the sides.
-
-
-
Place the spudger in an open space to keep the back case from shutting while you continue to slide the opening tool.
-
-
-
Remove the back cover with your hands once all points have been unlatched. It should separate completely from the screen that contains the battery and chip components.
-
-
-
-
Shove the Spudger below the battery pack to remove any tape or adhesive residue.
-
-
-
Lift the battery up with your hands to ensure complete detachment from the screen.
-
-
-
Identify the red wire attached to the node labeled "B+" and the black wire attached to the node labeled "B-"
-
-
-
Press the heated soldering iron down on the "B+" node while simultaneously tugging on the red wire.
-
-
-
Using the same process as the red wire, detach the black wire from the node labeled "B-".
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Команда
Baylor, Team 6-3, Shaver Spring 2015 Участник Baylor, Team 6-3, Shaver Spring 2015
BU-SHAVER-S15S6G3
3 членов
Автор 10 руководств
