Перейти к основному содержанию

Azpen A701 General Disassembly Prerequisite Guide Replacement

Выберете то, что вам нужно

  1. Azpen A701 General Disassembly Prerequisite Guide Replacement, General Disassembly Prerequisite Guide: шаг 1, изображение 1 из 1
    • Remove the two 2cm screws on the bottom using the PH0 Phillips head screw driver.

  2. Azpen A701 General Disassembly Prerequisite Guide Replacement: шаг 2, изображение 1 из 2 Azpen A701 General Disassembly Prerequisite Guide Replacement: шаг 2, изображение 2 из 2
    • Pry open back piece with plastic spudger.

    • Remove the back piece of the device.

    • The back panel may be difficult to pry off, use gentle force.

  3. Azpen A701 General Disassembly Prerequisite Guide Replacement: шаг 3, изображение 1 из 1
    • Disconnect speaker (which is attached by black and red wires) from back piece using plastic spudger.

  4. Azpen A701 General Disassembly Prerequisite Guide Replacement: шаг 4, изображение 1 из 1
    • Gently pry the battery off of the device with the plastic spudger.

    • There is a large amount of glue holding the battery to the device.

    • Do not puncture the battery with the plastic spudger.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Michael

Участник с: 03/11/15

568 Репутация

Автор 4 руководств

Команда

Colorado Springs, Team 2-1, Panko Spring 2015 Участник Colorado Springs, Team 2-1, Panko Spring 2015

UCCS-PANKO-S15S2G1

3 членов

Автор 12 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 2

За последние 30 дней: 4

За всё время: 354