Перейти к основному содержанию

Введение

Use this guide to remove the back cover of the AZ 727. This may take a little time, so do not throw the device down in disgust.

  1. Remove two 3mm screws with the Phillips screwdriver.
    • Remove two 3mm screws with the Phillips screwdriver.

  2. Insert a plastic opening tool in the center then gently work towards the center. Work the opening tool around the edges to separate the back cover from the rest of the device. Once the first corner props open, the rest should open easily.
    • Insert a plastic opening tool in the center then gently work towards the center.

    • Work the opening tool around the edges to separate the back cover from the rest of the device.

    • Once the first corner props open, the rest should open easily.

Заключение

To reassemble your device, follow these instructions in reverse order.

lkmemphis

Участник с: 18.07.2013

101 Репутация

1 Guide authored

Команда

UMemphis 1 Member of UMemphis 1

Community

1 член

1 Guide authored

Добавить комментарий

Просмотр статистики:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

За всё время: 223