Перейти к основному содержанию

Backbone One Phone Connector Replacement

Выберете то, что вам нужно

  1. Backbone One Phone Connector Replacement, Remove the screws: шаг 1, изображение 1 из 1
    • Use a Phillips screwdriver to remove the four 5.9 mm-long screws.

  2. Backbone One Phone Connector Replacement, Rotate the upper part: шаг 2, изображение 1 из 3 Backbone One Phone Connector Replacement, Rotate the upper part: шаг 2, изображение 2 из 3 Backbone One Phone Connector Replacement, Rotate the upper part: шаг 2, изображение 3 из 3
    • Lift up the upper cover of the controller.

    • Swing the upper cover over and place it on the controller case.

    • Make sure that the interconnecting cable has no tension.

  3. Backbone One Phone Connector Replacement, Remove the screws: шаг 3, изображение 1 из 1
    • Use a Phillips screwdriver to remove the two 4.8 mm-long screws securing the phone connector.

  4. Backbone One Phone Connector Replacement, Unthread the phone connector: шаг 4, изображение 1 из 3 Backbone One Phone Connector Replacement, Unthread the phone connector: шаг 4, изображение 2 из 3 Backbone One Phone Connector Replacement, Unthread the phone connector: шаг 4, изображение 3 из 3
    • Use your fingers to thread the phone connecter through the opening in the plastic cover at the right side of the rear cover.

  5. Backbone One Phone Connector Replacement, Disconnect the phone connector cable: шаг 5, изображение 1 из 2 Backbone One Phone Connector Replacement, Disconnect the phone connector cable: шаг 5, изображение 2 из 2
    • Use a pair of tweezers to disconnect the first phone connector cable from the mainboard.

  6. Backbone One Phone Connector Replacement, Disconnect the phone connector cable: шаг 6, изображение 1 из 2 Backbone One Phone Connector Replacement, Disconnect the phone connector cable: шаг 6, изображение 2 из 2
    • Use a pair of tweezers to disconnect the second phone connector cable from the mainboard.

  7. Backbone One Phone Connector Replacement, Remove the phone connector cable: шаг 7, изображение 1 из 1
    • Remove the phone connector cable.

Заключение

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Ask our Answers community for help.

Еще один человек закончил это руководство.

Adriana Zwink

Участник с: 12/18/19

47 656 Репутация

Автор 167 руководств

Команда

iFixit Участник iFixit

Staff

136 членов

Автор 16 573 руководств

4 Комментариев

Where can i buy a new part

reye_s - Ответить

Unfortunately we haven't found any replacement parts yet. If you find a website that offers replacement parts feel free to share your experience with us.

Adriana Zwink -

My son bent the connector cable. Where do I buy a new one?

Please update as soon as possible!

Krystal Glavic - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 7

За последние 7 дней: 27

За последние 30 дней: 118

За всё время: 2,323